WAC Lighting HR-LED251E-27-BN 2700K Warm White LEDme Square Miniature Recessed Downlight, 1″, Brushed Nickel

WAC Lighting HR-LED251E-27-BN 2700K Warm White LEDme Square Miniature Recessed Downlight, 1″, Brushed Nickel

$126.00 (as of September 9, 2018, 10:23 pm)

Die Cast aluminum construction trim, available in multiple finish options. Black solid Steel housing included. LED lamp and insulated wires are pre-installed within housing, with a dedicated Driver
Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-ic Ceiling applications
Available in adjustable, downlight, round, and square trims. All this unit requires is a 120V line

Shop Now

  • Description

Description

Ledme 1 inch square miniature recessed down light 2700K Warm White in Brushed Nickel. Perfect for ceilings, under cabinet and wall niches. LED miniature recessed down lights offer a super low profile and die cast aluminum trim with a 25° cutoff angle for comfortable general and task lighting.. die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, with a dedicated DRIVER. Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-ic ceiling applications. Sold as new construction, may be re-configured as a remodel on the field. Available in adjustable, down light, round, and square trims. All this unit requires is a 120V line. Smooth and continuous dimming to 10% with an electronic low voltage (elv) dimmer. High powered LED: color temperature: 2700K, 3000K, 3500K, or 4500K, rated hours: 100,000, voltage: 12V, power 3W, comparable to a 20W Mr11. Standards: UL, cul listed for damp locations.
Die Cast aluminum construction trim, available in multiple finish options. Black solid Steel housing included. LED lamp and insulated wires are pre-installed within housing, with a dedicated Driver
Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-ic Ceiling applications
Available in adjustable, downlight, round, and square trims. All this unit requires is a 120V line
Smooth and continuous dimming to 10% with an electronic low Voltage (elv) dimmer
High powered LED: color temperature: 2700K, 3000K, 3500K, or 4500K, rated hours: 100,000, Voltage: 12V, power 3W, comparable to a 20W MR11. Standards: UL, CUL listed for Damp locations
Aperture: 1″ – Cutout: 2 1/2″
Integral Electronic Driver (included) – May be dimmed with eletronic low voltage (ELV) dimmer
25Degree cutoff angle for comfortable general and task lighting – Narrow flood beam spread
2700K Color Temperature
Brushed Nickel Finish