Easy-Tap Insulation Piercing Connector – IPCS Series, 1/0-8 AWG main and 2-10 AWG tag Conductor Range, 1.8″ Width, 3.1″ Height, 2.2″ Length

Easy-Tap Insulation Piercing Connector – IPCS Series, 1/0-8 AWG main and 2-10 AWG tag Conductor Range, 1.8″ Width, 3.1″ Height, 2.2″ Length

$86.47 (as of September 9, 2018, 10:44 pm)

Insulation-piercing connector for tapping or splicing electrical lines
Can be used on main lines from 1/0 to #8 AWG with tap lines from #2 to #10 AWG
Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications

Categories: ,

Shop Now

  • Description

Description

This NSi Industries IPCS1002 Easy-Tap insulation-piercing connector is suitable for tapping or splicing electrical lines in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. It can be used on main lines from American Wire Gauge (AWG) 1/0 to #8 with tap lines from #2 to #10 AWG. It is fully insulated and can be used on energized conductors as long as the tap line is not under load. Double shear-head bolts ensure that the proper amount of torque is applied during installation. This connector is not recommended for use with extra-flexible cables and is not approved for submersible applications. It is rated for 600V and 90 degrees C and meets American National Standards Institute (ANSI) C119.4 requirements and is Underwriters Laboratories (UL) 486B Listed. This insulation-piercing connector is suitable for a wide range of electrical line tapping and splicing applications with appropriately sized conductors.

Specifications
Main line size range 1/0 to #8 AWG
Tap line size range #2 to #10 AWG
Copper current rating 190 amp
Aluminum current rating 150 amp
Voltage rating 600V
Temperature rating 90 degrees C
Dimensions* 3.1 x 1.8 x 2.2 inches (H x W x L)
Standards met ANSI C119.4, UL 486B Listed

* H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

Insulation-piercing connector for tapping or splicing electrical lines
Can be used on main lines from 1/0 to #8 AWG with tap lines from #2 to #10 AWG
Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications
Rated for 600V and 90 degrees C
Meets ANSI C119.4 requirements and is UL 486B Listed