Amprobe MLS55-3 Pipe Transmitter for AT-3500

-13%

Amprobe MLS55-3 Pipe Transmitter for AT-3500

$599.95 (as of September 9, 2018, 7:08 pm) $520.31

Induces a frequency into a buried pipe for active location and tracing of the feature
Can locate non-metallic pipes
Helps provide more accurate depth measurement than locating with just a receiver and transmitter

SKU: AMPROBEMLS55-3 Categories: ,

Shop Now

  • Description

Description

The Amprobe MLS55-3 sonde pipe transmitter induces a frequency into a buried pipe for tracing the pipe with the R-3500 receiver in the Amprobe AT-3500 underground cable and pipe locating system (not included). The MLS55-3 sonde pipe locator can locate non-metallic pipes and, when used with a transmitter and receiver, it helps provide a more accurate depth measurement than when locating with just a receiver and transmitter. The M-5000 operates at a 33 kilohertz (kHz) frequency. It measures 4.8 x 0.74 x 0.74 inches (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back).

Pipe and cable locators, also called utility locators, find pipes, cables, and wires that are buried in the ground for determining where to excavate on a site and for locating buried fixtures in need of maintenance or replacement. Pipe and cable locators are used in electrical, plumbing, telecommunications, utility maintenance, construction, and home repair applications. They have a transmitter and a receiver and use active or passive methods of location. In active location, the transmitter induces a signal at a specific frequency either into the ground, where it’s picked up by buried utilities, or directly into a pipe, cable, or wire that is connected to the transmitter. As the signal is being transmitted into the buried utility, the receiver is passed over an area until it detects the signal and locates the buried pipe, cable, or wire. In passive location, the receiver searches for alternating current (AC) frequencies or radio waves emitted by energized cables, wires, and pipes without the need for a transmitter. Pipe transmitters, signal clamps, and grounding stakes can be used to help improve locator accuracy.

Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.

Induces a frequency into a buried pipe for active location and tracing of the feature
Can locate non-metallic pipes
Helps provide more accurate depth measurement than locating with just a receiver and transmitter
Operates at a 33 kilohertz (kHz) frequency
For use with the R-3500 receiver in the Amprobe AT-3500 and pipe and cable locating system