3 Axis CNC Kit 3.1Nm Nema 24 Stepper Motor & M542T Driver CNC Mill Plasma Lathe

3 Axis CNC Kit 3.1Nm Nema 24 Stepper Motor & M542T Driver CNC Mill Plasma Lathe

$308.00 (as of September 9, 2018, 9:10 pm)

Package Including: 3 x 2/4 phase Nema 23 Stepper Motor3 x 2/4 phase Nema 23 Stepper Motor Driver 24-50VDC 1.5A-4.5A 256 Microstep Driver 24-50VDC 1.5A-4.5A 256 Microstep
3 x Nema 24 Dual Shaft CNC Stepper Motor 3.5A 3.1Nm(439 oz.in)
1 x Switching Power Supply 350W 36V 9.7A 115V/230V

Shop Now

  • Description

Description

Stepper Motor 24HS34-3504D

Stepper Driver M542T

* Supply voltage up to 50DC
* Output current up to 4.5A
* Self-adjustment technology
* Pure-sinusoidal current control technology
* Pulse input frequency up to 300 KHz
* TTL compatible & optically isolated input
* Automatic idle-current reduction
* 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
* Suitable for 2-phase and 4-phase motors
* Support PUL/DIR and CW/CCW modes
* Short-voltage, over-voltage, over-current protections

* Power Supply S-350-36

* DC Output: 36V 9.8A
* Wave and Noise: 120mVp-p
* Inlet Stability: ±0.1%
* Load Stability: ±0.3%
* Efficiency: 85%
* Adjustable range: 32V~39V
* AC Input Voltage: 93~132V/176~264VAC Slected by Switch
* AC Input Current: 3.54A/115VAC 1.73A/230VAC
* Working Temperature: -10~50°C
* Safety Standards: GB4943, UL60950, EN60950
* EMC Standards: GB9254, 55022, Class A

CNC Breakout Board ST-V2

* Maximum support 5-axis stepper motor driver controllers
* Compatible with MACH3, Linux CNC (EMC2), parallel-control CNC software
* USB power supply and peripherals powered phase are separated to keepcomputer security
* All the signals are opto-isolated to protect computer security
* 5-input interface to define the Limit, Emergence-Stop, Cutter alignment
* Wide input voltage range: 12-24V, anti-reverse function
* One relay output control interface, accessed by spindle motor or air pump, water pump
* Output 0-10V analog voltage for inverter to control spindle speed
* Input Voltage: USB port from PC or 12-24V power supply(optional)
* Drive type: Pulse & Direction Signal Control
* Suitable Microstep Driver: 2 Phase Microstep Driver

Package Including: 3 x 2/4 phase Nema 23 Stepper Motor3 x 2/4 phase Nema 23 Stepper Motor Driver 24-50VDC 1.5A-4.5A 256 Microstep Driver 24-50VDC 1.5A-4.5A 256 Microstep
3 x Nema 24 Dual Shaft CNC Stepper Motor 3.5A 3.1Nm(439 oz.in)
1 x Switching Power Supply 350W 36V 9.7A 115V/230V