3 Axis CNC Kit 13Nm Nema 34 Stepper Motor & MA860H Driver CNC Plasma Laser Lathe

3 Axis CNC Kit 13Nm Nema 34 Stepper Motor & MA860H Driver CNC Plasma Laser Lathe

$570.90 (as of September 9, 2018, 9:06 pm)

3 x MA860H Stepper Motor Driver Max 80VAC or 110VDC with 2.4-7.2A
3 x High Torque/Speed Nema 34 CNC Stepper Motor 13Nm(1841oz.in)
3 x Switching Power Supply 350W 60V 5.9A 115V/230V

Shop Now

  • Description
  • Amazon Customer Reviews

Description

Stepper Motor 34HS59-5004S

Stepper Driver MA860H

* Supply voltage up to 80VAC or +110VDC
* Output current up to 7.2A
* Self-adjustment technology
* Pure-sinusoidal current control technology
* Pulse input frequency up to 300 KHz
* TTL compatible and optically isolated input
* Automatic idle-current reduction
* 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
* Suitable for 2-phase, 4-phase motors
* Support PUL/DIR, CW/CCW modes
* Short-voltage, over-voltage, over-current, short-cicuit protection

* Power Supply S-350-60

* DC Output: 60V 5.9A
* Wave and Noise: 300mVp-p
* Inlet Stability: ±0.1%
* Load Stability: ±0.3%
* Efficiency: 86%
* Adjustable range for DC Voltage: 54.5V~67V
* AC Input Voltage: 93~132V/176~264VAC Slected by Switch
* AC Input Current: 3.6A/115VAC 1.8A/230VAC
* Working Temperature: -10~50°C
* Safety Standards: GB4943, UL60950, EN60950
* EMC Standards: GB9254, 55022

CNC Breakout Board ST-V2

* Maximum support 5-axis stepper motor driver controllers
* Compatible with MACH3, Linux CNC (EMC2) parallel-control CNC software
* Seperated USB power supply,peripherals powered phase and opto-isolated signals are to protect computer security
* 5-input interface to define the Limit, Emergence-Stop, Cutter alignment
* Wide input voltage range: 12-24V with anti-reverse function
* One relay output control interface, accessed by spindle motor or air pump, water pump
* Output 0-10V analog voltage for inverter to control spindle speed
* Input Voltage: USB port from PC or 12-24V power supply
* Drive type: Pulse, Direction Signal Control
* Suitable Microstep Driver: 2 Phase

3 x MA860H Stepper Motor Driver Max 80VAC or 110VDC with 2.4-7.2A
3 x High Torque/Speed Nema 34 CNC Stepper Motor 13Nm(1841oz.in)
3 x Switching Power Supply 350W 60V 5.9A 115V/230V